Front Control Arm Pillowball Bushings Vehicle Fitment Year Make Model Submodel Drive 1988Honda Civic 1988Honda CRX 1989Honda Civic 1989Honda CRX 1990Acura Integra 1990Honda Civic 1990Honda CRX 1991Acura Integra 1991Honda...

Hardened rubber mount replaces the OE mount with a more rigid mount reducing enging movement and allowing for more direct power transfer to the wheels.Vehicle Fitment Year Make Model Submodel Drive 2002Acura RSX 2002Honda Civic Si 2003Acura...

TruHart rear knuckle pillowball bushings replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feel FITS TYPE R ONLYVehicle Fitment Year Make Model Submodel Drive 2017Honda Civic Type R...

TruHart end link sets are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.  These end links will...

TruHart end link sets are an ideal solution for upgraded swaybars. When you use thicker swaybars the OEM end links typically cannot hold up to additional strain the upgraded bar puts on the end link often breaking or bending them.  These end links will...

An ideal solution for a Subaru specific problem. This kit changes the pick-up point for the front lower control arm, which results in a decrease in the built-in anti-dive/anti-lift geometry effect of the OE suspension. The hardened rubber bushings also...

When you lower a vehicle the geometry of the suspension is altered.  The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms. The result is corrected suspension geometry...

TruHart tie rod ends mount upside-down to keep the vehicle's roll center closer to normal when lowering a vehicle.   Vehicle must be lowered 2in or more from stock These tie rod ends are made to correct suspension geometry on lowered applications...

When the S2000 (AP1 or AP2) is lowered it pulls the driveshaft out of the hub and the angle is changed. These spacers prevent premature bearing and CV joint wear associated with these changes. In some instances, lowering causes the driveshaft to vibrate...

When you lower a vehicle the geometry of the suspension is altered.  The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms. The result is corrected suspension geometry...

When you lower a vehicle the geometry of the suspension is altered.  The increased length of the TruHart Roll Center Adjusters repositions and corrects the position of the front hub and lower control arms. The result is corrected suspension geometry...

TruHart compliance bushings replace your worn factory units with hardened rubber units reducing deflection and providing a more direct road feelVehicle Fitment Year Make Model Submodel Drive 1992Honda Civic 1993Honda Civic 1994Acura...